Product Description

US CO2 valve thread
Standard cylinder valve outlet connection
Inlet connection:CGA320
One gauge shows pressure for carbonating and dispensing. The other gauge displays how much CO2 is left, so you don’t run out during the middle of your homebrew party

Package includes:
1* Co2 regulator

Matters needing attention:
1. Before installing the Co2 regulator gauge, open the cylinder valve to blow down the dirt, so as to prevent dust and moisture from entering the Dual Gauge CO2 Beer Regulator.
When opening the cylinder valve, the operator should not stand at the front of the outlet of the bottle valve to prevent the high-pressure gas from hurting suddenly.
2. The kegerator Co2 regulator should be turned loose before open the valve. When the cylinder valve is opened, it should be slow and not too hard to prevent high pressure gas from damaging the Co2 pressure regulator and high pressure meter.
3. After opening the cylinder valve, check whether there is any leakage of gas in each part, whether the pressure gauge works normally, and then connect the hose after the inspection is finished.
4. when adjusting working pressure, it should slowly rotate the pressure regulating screw to prevent high pressure gas from damaging the diaphragm or damaging the low pressure meter.
5. When the CO2 Keg Pressure Regulator is used in the process of freezing, use hot water or steam to thaw.Never use fire
6. When you stop working, you should close the bottle valve and slowly release the gas in the co2 regulator dual, and make the pressure regulating spring in a free state.
7. The CO2 Keg Pressure Regulator must be checked and calibrated regularly to ensure that the voltage regulation is reliable and the reading accuracy is accurate.
8. CO2 pressure reducer and other gas regulator can not be exchanged for each other.Always place a washer between the lock-down nut and the tank to ensure a tight seal and Replace washers regularly.

Product Features

• 🍻Works with any Co2 tank with a CGA-320 valve, 1/4″ barbed output for use with 1/4″ ID hose, Integral Safety pressure relief valve releases at 45 PSI; Integrated nylon tank connection washer (and spare) Prevent leakage.
• 🍻 Durable chrome-plated brass body, Inlet nipple has a sintered metal flow control filter to keep dirt and other particles from harming the internal regulator parts; Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall.
• 🍻 This dual gauge draft beer regulator has a gauge on top that measures CO2 pressure in the keg as well as a gauge on the side that indicates how much CO2 is left in the gas cylinder, so you’ll never be caught off guard by an empty CO2 tank again.
• 🍻 Commercial grade design withstands the demands of the busiest bars and restaurants, allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.
• 🍻 We have a Satisfaction Guarantee. Letting you know that you have a free replacement or full refund in the case of you being unsatisfied with any part of your Beer Regulator. Without you having to go to the post office or pay for postage in every case.