Product Description

Introduction

This hand-held electric capping machine is mainly used to the screw cap tighten and loosen. Easy to carry, which can be easily used to tighten or loosen the cap of its adjustable clutch (readjustment) can effectively avoid the cap damage and reduce the wear and tear of the internal plug once the cap is tightened chuck to stop spinning, show that you can be the next cap operation. Capping work applicable to a variety of high strength bottle caps apply to the the cap direct range of 10-50 mm, a single production capacity of up to 15-30 bottles / min. (depending on proficiency)

Specification
Power Input: AC110V
Power Consumption: 80w
Work Type: Electric Capping
Operation forms: handheld
Capping diameter : 10-50m
Production capacity: 15-30 bottles / minute (depending on proficiency)
Bottle Height: not limited
Torque :3-30kgf. cm
Fitment: For screwing and unscrewing of the screw cap
Rubber insert: 10 – 20 mm; 20 – 30 mm; 30 – 40 mm; 40 – 50 mm
No-load speed: 1000 r/min
Clutch: Adjustable

Operation:
Put chuck onto the cap to be tightened.
Push down switch to active the capper.
The capper starts and tightens the cap.
The capper automatically shuts off while reaching the pre set torque.

Package Content:
1 x Electric Capping Machine
1 x Spring Balancer
4 x Rubber Insert
2 x Chuck
1 x Plug Adapter
1 x M5 Allen Key
1 set x Auxiliary tools

Product Features

• 1.Power Input: 110V
• 2.Work Type: Electric Capping
• 3.Torque :3-30kgf. Cm
• 4.Bottle Height: not limited
• 5.Capping work applicable to a variety of high strength bottle caps apply to the the cap direct range of 10-50 mm, a single production capacity of up to 15-30 bottles / min. (depending on proficiency)